LOTO SolutionsLockout/tagout product catalogue

• Patented-design body
• Stainless steel shackle
• 1 key per padlock

• Reinforced nylon body; withstands temperatures from −20 °C to +120 °C. The stainless steel shackle is chrome-plated, strong and protected against corrosion; the non-conductive shackle is nylon, withstands temperatures from −20 °C to +120 °C, with high strength and no fracturing under deformation.
• Durable, high-strength brass cylinder, resistant to wear and corrosion.
• Automatic shackle: when the padlock is unlocked, the shackle springs open automatically. To lock it, simply press the shackle down; there is no need to insert or turn the key.
• Laser marking and logo engraving available on request.
• Available in different colours.

• Available keyed alike, keyed different, master key and grand master key
• 1 key per padlock

• Brass cylinder and key with nylon body; greater resistance to corrosion.
• Reinforced nylon body; withstands temperatures from −20 °C to +120 °C. The steel shackle is chrome-plated; the non-conductive shackle is nylon, withstands temperatures from −20 °C to +120 °C, with high strength and no fracturing under deformation.
• Key retention: the key cannot be removed while the shackle is open.
• Laser marking and logo engraving available on request.
• Available in different colours.

• Available keyed different, keyed alike, master key and grand master key

• Aluminium body and hardened steel shackle with triple-layer chrome plating.
• When the padlock is unlocked, the shackle springs open automatically.
• Shackle length: 25 mm, 38 mm, 76 mm.
• Standard colours: red, yellow, blue, orange, green, purple, black, silver.
• Other shackle lengths on request.

• Solid brass body and chrome-plated hardened steel shackle; high corrosion resistance.
• Durable brass cylinder; resistant to cutting and sawing. Each padlock comes with 2 keys.
• Body sizes: 30 mm, 40 mm, 50 mm, 60 mm, 70 mm. Other sizes on request.
• Other shackle lengths on request.

• Made of hardened steel with a long-life brass cylinder; resistant to cutting and sawing.
• With a plastic cover on the base, normally in blue. Other colours available.
• Available keyed different or keyed alike.
• Other body widths and shackle lengths available.

• Hardened steel shackle with PVC sleeve; resistant to cutting and sawing.
• Durable, high-strength, high-precision brass cylinder, resistant to corrosion.
• Cover over the keyway; protects against water and dust.
• Available in different colours and shackles.

• Made of tough ABS; withstands temperatures from −20 °C to +90 °C. High resistance to cracking and abrasion; suitable for extreme weather conditions.
• The two halves of the device enclose the ball valve handle and prevent it from being operated accidentally.

• Made of PC, PU and PVC.
• Easy to carry and use: the bag is secured with the strap.
• Careful workmanship, smooth surface and good finish.
• Suitable for practically all types of pipe, including insulated, PVC and metal pipes.
• Accepts up to 4 padlocks at once; suitable for several people or work teams.

• Made of tough ABS; withstands temperatures from −20 °C to +90 °C.
• Accepts 1 padlock with a shackle up to 8 mm in diameter.
• Available in red; other colours on request. Includes labels in English.

• Made of ABS; withstands temperatures from −20 °C to +90 °C.
• Good chemical resistance: withstands oil stains and corrosion from chemicals.
• Covers the handle and spins freely over it; adjustable to all types of valve handle.

• Made of tough ABS; withstands temperatures from −20 °C to +90 °C.
• Secured with padlocks; shackle up to 3/8" (9.8 mm) in diameter.
• Covers the handwheel and spins freely over it; adjustable to different handwheel sizes.

• Locks out the valve in seconds: the LO-4022 cable lockout is threaded through the required eyelet and around the valve neck.
• Made of PA nylon, a light, tough thermoplastic with good chemical resistance; suitable for demanding environments.
• Orientation arrows make installation easier and reduce errors in use.
• The stainless steel rivet allows the device to open and close smoothly for a correct fit.

• Made of tough ABS.
• Exclusive anti-rotation device; suitable for the full range of pull-handle valves, from 1/2“ to 8” in diameter.
• Practical one-piece design that stays together both in use and in storage.
• Accepts up to three padlocks.
• Suitable for the most common pull-handle valves in food and beverage, water supply, chemical, pharmaceutical and other industries.
• Secures the valve handle in any position: fully closed, partially open or fully open.

• Made of PA; withstands temperatures from −20 °C to +120 °C.
• Stainless steel metal parts, corrosion-resistant.
• For butterfly valves and T-handle ball valves that need to be locked out in the food, chemical and pharmaceutical sectors.

• Made of ABS engineering plastic; withstands temperatures from −20 °C to +90 °C.
• Free adjustment; fits the handle length of most sanitary butterfly valves on the market.
• Suitable for the food, pharmaceutical and similar sectors.
• Can be installed by one person.

• Made of industrial-grade steel and nylon; withstands temperatures from −20 °C to +120 °C.
• Locks out different types of butterfly valve by means of the clamp on the base.
• Highly versatile and secure system.
• Designed to withstand impacts and resist chemicals; suitable for practically any environment.
• Can be combined with different accessories to form a range of universal valve lockouts.

• Made of industrial-grade steel and nylon; withstands temperatures from −20 °C to +120 °C.
• Used with the universal valve lockout base.

• Made of transparent PC; withstands temperatures from −20 °C to +120 °C.
• Once closed, it prevents the valve from being turned.
• The base accepts two half-rings to fit the valve.
• Accepts valves up to 55 mm in diameter and 43 mm in height.
• Suitable for valves of 24.4 mm and from 32 mm to 46 mm in diameter.

• Made of transparent PC; withstands temperatures from −20 °C to +120 °C.
• Once closed, it prevents the valve handles from being turned.
• The two half-rings allow it to fit double-shut-off valves.
• Accepts controls up to 60 mm in height.

• Made of transparent PC; withstands temperatures from −20 °C to +120 °C.
• Once closed, it prevents the valve handles from being turned.
• Direct snap-fit closure.
• LO-3056 accepts inner valves up to 65 mm in diameter and 29 mm in height; LO-3057, up to 89 mm in diameter and 49 mm in height.
• LO-3056 accepts outer valves up to 70 mm in diameter and 33.6 mm in height; LO-3057, up to 94 mm in diameter and 53 mm in height.

• Made of transparent PC; withstands temperatures from −20 °C to +120 °C.
• Once closed, it prevents the valve from being turned.
• The base accepts two half-rings to fit the valve.
• Suitable for valves of 24.5 mm and from 32 mm to 46 mm in diameter.

• ABS body, resistant to chemicals.
• Multi-strand steel cable, strong and flexible, with a clear plastic insulating coating.
• Cable length can be customised.
• Accepts up to 4 padlocks for multiple lockout.
• Includes high-visibility, reusable and writable safety tags. Customisable.
• Suitable for locking out a single valve or several adjacent valves.

• Glass-fibre reinforced nylon body, resistant to chemicals.
• Multi-strand steel cable, strong and flexible, with a red insulating coating.
• Cable length can be customised.
• Accepts 1 padlock.
• Can be combined with lockout hasps for lockout by several workers.

• Made from highly durable industrial nylon, with an insulation-coated steel cable.
• Designed to effectively lock out all types of isolation points: gate valves, “T” handwheels and other mechanical devices that are difficult to secure.
• The handle allows the device to be operated without tools.
• Cable length and colour can be customised.
• Accepts up to 8 padlocks for multiple lockout.

• ABS body with an insulating plastic-coated steel cable.
• Accepts up to 6 padlocks for multiple lockout.
• Cable length and colour can be customised.
• Includes high-visibility, reusable and writable safety tags. Customisable.

• Made from nylon, with an insulating plastic-coated steel cable.
• Accepts up to 6 padlocks for multiple lockout.
• Non-slip design shaped to fit the hand; very comfortable to use.
• Cable length and colour can be customised.
• Includes high-visibility, reusable and writable safety tags.

• Made from highly durable ABS, with a stainless steel cable housed inside; corrosion-resistant and temperature-resistant.
• Push-button automatic retraction mechanism: the cable retracts and stays taut, with no slack.
• Designed to effectively lock out various types of disconnect switches and small gate valves.
• With the automatic retraction function it is easy to handle, compact and portable.
• Accepts up to 8 padlocks for multiple lockout; maximum shackle diameter 8 mm.
• Cable length and colour can be customised.

• Made from highly durable ABS.
• Designed to effectively lock out all types of energy isolation points and mechanical devices that are difficult to secure.
• Available with interchangeable Ø 3.2 mm and Ø 5 mm cables.
• Accepts up to 5 padlocks for multiple lockout.

• PA (nylon) body with an insulation-coated steel cable.
• For locking out devices with a small lockout hole.
• Accepts up to 2 padlocks for multiple lockout. Ø 8 mm and Ø 6 mm padlock holes.
• Cable length and colour can be customised.

• Highly durable reinforced ABS body; withstands temperatures from −20 °C to +90 °C. Steel cable with an insulating PVC coating.
• Accepts up to 4 padlocks for multiple lockout.
• Cable length and colour can be customised.

• Reinforced PA nylon body; withstands temperatures from −20 °C to +80 °C.
• Cable with a clear plastic insulating coating.
• Ergonomic design with a “pop-up” closure, easy to operate.
• Accepts up to 5 padlocks for multiple lockout.

• Chemical-resistant ABS body; steel cable with a non-conductive nylon coating.
• Lightweight construction, easy to handle, carry and operate.
• Accepts up to 6 padlocks for locking out several energy isolation points.

• Made from impact-resistant alloy; withstands temperatures from −20 °C to 120 °C.
• Large thumbwheel for easy cable retraction; anti-rotation function that makes the lockout more secure.
• Suitable for multi-point lockout; accepts up to 4 workers at the same time.
• Available with a stainless steel cable or a plastic cable.

• Suitable for long-term use: each seal is self-locking. Once the cable has been passed through the body, it can only be removed by cutting it.
• All seals can be laser-marked with individual numbering.
• Cable length can be customised.
• Colours can be customised; usually red, yellow, green and blue.

• Made of reinforced PA nylon (engineering plastic).
• Suitable for most European and Asian circuit breakers.
• Recommended for use together with a safety padlock.
• Simple installation, no tools required.
• Accepts a padlock with a shackle diameter of up to 7.3 mm (9/32").
• Suitable for single-pole and multi-pole circuit breakers.

• Made of reinforced PA nylon (engineering plastic).
• Suitable for most European and Asian circuit breakers.
• Recommended for use together with a safety padlock.
• Simple installation, no tools required.
• Accepts a padlock with a shackle diameter of up to 7.3 mm (9/32").
• Suitable for single-pole and multi-pole circuit breakers.

• Made of reinforced PA nylon (engineering plastic).
• Suitable for most European and Asian circuit breakers.
• Recommended for use together with a safety padlock.
• Simple installation, no tools required.
• Accepts a padlock with a shackle diameter of up to 7.3 mm (9/32").
• Suitable for single-pole and multi-pole circuit breakers.

• Made of reinforced PA nylon (engineering plastic).
• Suitable for most European and Asian circuit breakers.
• Recommended for use together with a safety padlock.
• Simple installation, no tools required.
• Accepts a padlock with a shackle diameter of up to 7 mm (9/32").
• Suitable for multi-pole circuit breakers.

• Made of reinforced PA nylon (engineering plastic).
• Locks out various types of circuit breakers.

• Made of reinforced PA nylon (engineering plastic).
• Locks out various types of circuit breakers.

• Made of tough ABS; withstands temperatures from −20 °C to +90 °C.
• For miniature circuit breakers with a lockout hole spacing of 13 mm.
• Accepts padlock shackles of up to 7.5 mm (9/32") in diameter.

• Made of ABS and polycarbonate (PC).
• Suitable for most miniature circuit breakers with a toggle opening of 11 mm or less.
• For a single padlock; 7.8 mm diameter lockout hole.

• Made of ABS and polycarbonate (PC).
• Suitable for most miniature circuit breakers with a toggle opening of 11 mm and 13 mm.
• For a single padlock; 7.8 mm diameter lockout hole.

• Made of reinforced PA nylon (engineering plastic).
• Locks out various types of circuit breakers.

• Made of reinforced PA nylon; withstands temperatures from −20 °C to +120 °C.
• Suitable for locking out most miniature and small circuit breakers.
• Hole for a single padlock.

• Made of reinforced PA nylon (engineering plastic).
• Locks out various types of circuit breakers.

• Made of reinforced PA nylon (engineering plastic).
• Locks out various types of circuit breakers.
• Accepts a padlock with a shackle diameter of up to 9.5 mm.

• Made of tough ABS.
• Self-locking screws; simple, tool-free lockout.
• Wide range of use: suitable for all types of miniature circuit breakers (toggle width ≤ 15 mm).

• Made of reinforced PA nylon (engineering plastic), with brass screw.
• Self-locking screws; simple, tool-free lockout.
• Wide range of use: suitable for small and medium MCCBs and for any miniature circuit breaker (toggle width ≤ 10 mm).

• Made of tough polypropylene and impact-modified nylon.
• Has locking pads on the base to hold long sliding switches and switches with a wide angular throw, which are difficult to lock out.
• Easily operated without tools.
• Accepts padlock shackles of up to 7.5 mm (9/32") in diameter.

• Made of tough polypropylene and impact-modified nylon; withstands temperatures from −5 °C to +100 °C.
• Easily operated without tools.
• Accepts padlock shackles of up to 7.5 mm (9/32") in diameter.

• Made of tough polypropylene and impact-modified nylon.
• Has locking pads on the base to hold long sliding switches and switches with a wide angular throw, which are difficult to lock out.
• Easily operated without tools.
• Accepts padlock shackles of up to 7.5 mm (9/32") in diameter.

• Made of tough polypropylene and impact-modified nylon.
• Has locking pads on the base to hold long sliding switches and switches with a wide angular throw, which are difficult to lock out.
• Easily operated without tools.
• Accepts padlock shackles of up to 7.5 mm (9/32") in diameter.

• Made of PC engineering plastic.
• Built-in clamping screw for simple lockout. Fits without tools.
• Multi-hole design: allows ten workers to lock out at the same time.
• Accepts padlock shackles of up to 8 mm in diameter.

• Material: die-cast aluminium alloy, PA nylon and painted metal.
• Suitable for wide or tall circuit breaker toggles, common on high-voltage or high-amperage circuit breakers.
• Fits onto the toggle by turning the clamping screw; the clamping lever and lockout cover are then closed so that the jaw cannot loosen.

• Material: die-cast aluminium alloy, PA nylon and painted metal.
• Suitable for standard-height toggles and toggles with a tie-bar, common on 120/240 V circuit breakers.
• Fits onto the toggle by turning the clamping screw; the clamping lever and lockout cover are then closed so that the jaw cannot loosen.

• Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
• Simple installation, no tools required.
• Accepts padlocks with a shackle diameter of up to 8 mm.

• Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
• Simple installation, no tools required.
• Accepts padlocks with a shackle diameter of up to 8 mm.

• Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
• Simple installation, no tools required.
• Accepts padlocks with a shackle diameter of up to 8 mm.

• Made of aluminium alloy.
• Suitable for most European and Asian circuit breakers.
• Placed over the circuit breaker toggle and tightened with a screwdriver.
• Accepts padlocks with a shackle diameter of up to 8.3 mm.
• Available for single-pole and multi-pole circuit breakers.

Available in several colours (see picture).

• Body made of standard A3 steel sheet, with high-temperature-resistant painted finish.
• Hook head adjustable to two positions by sliding it to the left or right.
• Suitable for locking out with several padlocks.
• Designed to lock medium and large Schneider moulded case circuit breakers in the open (OFF) position.

• Made of engineering plastic.
• Suitable for most European and Asian circuit breakers.
• Recommended for use together with a padlock for greater safety.
• Simple installation, no tools required.
• Available for single-pole and multi-pole circuit breakers.

• Made of reinforced PP engineering plastic.
• For 120 V circuit breakers that have a hole in the toggle.
• Quick and simple to use: snaps into position and the padlock is fitted.
• Accepts padlock shackles of up to 10 mm in diameter.

• Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
• Suitable for most miniature circuit breakers with an opening of 11 mm or less in the toggle area.
• Accepts padlock shackles of up to 8 mm in diameter.

• ABS engineering plastic base and PA nylon main bar.
• The self-adhesive rear rail can be fixed permanently to the electrical panel: simply clean the surface and stick it on, no drilling required.
• Suitable lockout solution for large or irregularly shaped switches.
• The coloured bars indicate the switch position: red bar, switch open (OFF); green bar, switch closed (ON).

• Made of nylon (PA) engineering plastic.
• No need to install an in-line interlock valve: pneumatic energy can be isolated at lower cost and with greater convenience.
• The central hole allows it to be left permanently fitted on the air hose; the side ring is used to hang up the hose and the device.
• Accepts padlocks with a shackle diameter of up to 8 mm.

• Made of corrosion-resistant 304 stainless steel.
• Prevents the pneumatic fitting from being connected to the compressed air source.
• Suitable for virtually all male pneumatic fittings commonly found in industrial installations.
• Dimensions: 35 mm wide × 196 mm long × 3 mm thick (1-3/8“ × 7-3/4” × 1/8").
• Accepts 2 padlocks with a shackle diameter ≤ 8.5 mm.

• Made of tough ABS.
• Product with no metal parts: does not produce sparks and offers good chemical resistance.
• Resists cracking and abrasion in extreme weather and temperature conditions.
• Can be combined with lockout hasps and padlocks.

Dimensions A, B, C and D in mm.

• Made of ABS engineering plastic.
• Prevents access to the main cylinder valve.
• Accepts cylinder necks up to 35 mm and a maximum inside diameter of 83 mm.
• Quick and simple installation.
• Accepts up to 3 padlocks with a shackle diameter of up to 8.5 mm.

• Made of high-strength ABS.
• Prevents the plug from being inserted into the socket; suitable for all types of industrial plugs.
• The plug is fully enclosed inside the device, with the cable exiting through an access hole.
• Accepts 2 to 4 padlocks with a shackle diameter of up to 9 mm.

Dimensions A, B, C, d1 and d2 in mm.

• Made of tough ABS.
• Several hole sizes to suit different types of plugs and fittings.
• The holes are designed for the narrow-neck male pneumatic fittings commonly used on compressed air hoses.
• Suitable for all types of electrical plugs and pneumatic fittings.
• Recommended for use with a padlock for greater safety; accepts up to 4 padlocks with a shackle diameter of up to 7.9 mm.

• Made of ABS engineering plastic; withstands temperatures from −20 °C to +90 °C.
• Allows simultaneous lockout by 2 people.
• Suitable for locking out industrial and domestic plugs.

Dimensions A, B, C and d1 in mm.

• Made of transparent PC.
• Prevents access to the push button or control.
• The horseshoe-shaped adapter base allows mounting over raised legend plates and in an off-centre position, to suit rotary selectors.
• Accepts push buttons up to 50 mm in diameter and 45 mm in height.
• Suitable for push buttons of 31 mm and 22 mm in diameter.

• Made of transparent PC.
• Prevents access to the push button or control.
• Suitable for push buttons from 22.5 mm to 30 mm in diameter.
• Prevents operation by mistake.

• Made of tough transparent polycarbonate (PC).
• Fits push-type or twist-release emergency stop buttons.
• Easy to use; permanently prevents accidental operation.
• Suitable for push buttons from 22 mm to 30 mm in diameter.

• Made of tough transparent polycarbonate (PC).
• Fits push-type or twist-release emergency stop buttons.
• Easy to use; permanently prevents accidental operation.
• Suitable for push buttons from 22.7 mm to 29.8 mm in diameter.

• Made of flexible, hard-wearing fabric.
• Effectively locks out large or irregularly shaped electrical connectors and hoist pendant controls.
• Flexible, hard-wearing rip-stop nylon bag; fits easily into safety toolboxes.
• Customisable warning sign.

• Made of wear-resistant polyester fabric.
• With a 5 m cable lockout it can lock out all types of manholes.
• Warning sign printed on the surface; customisable.

• ABS engineering plastic base and nylon (PA) main rod.
• The self-adhesive rear guide is fixed permanently to the electrical panel: simply clean the surface and stick it on, no drilling required.
• Locks out disconnect switches from 35 to 85 mm in height.
• The coloured bars indicate the switch position: the red bar indicates it is off and the green bar, on.

• Made of ABS engineering plastic.
• Compact, lightweight body; locks out most types of industrial plugs.
• Customisable labels.
• Universal use: locks out industrial plugs of all sizes without the need for tools.
• Recommended for use with padlocks; can be combined with lockout hasps for multiple users.

• Made of high-strength transparent polycarbonate (PC).
• Permanently installed over all types of switches and other electrical devices; the padlock must be opened to operate them, which prevents accidental knocks.
• Fixed with self-tapping screws or 3M double-sided tape.

• Made of polycarbonate (PC); withstands temperatures from −20 °C to +120 °C.
• Easy to install, ready to use.
• Suitable for safety protection during equipment maintenance in the chemical industry, power plants, steelworks, workshops, etc.
• 1 padlock hole position.

• Made of engineering ABS and PC; withstands temperatures from −20 °C to +90 °C.
• Transparent panel that shows whether the switch is on or off.
• Adjustable to 2 sizes for locking out wall switches.
• Customisable labels in any language.

• Made of high-strength transparent polycarbonate (PC).
• Permanently installed over the wall switch or other electrical devices; the padlock must be opened to operate them.
• Removable base and sides. The holes on both sides also allow a plug inserted in the wall socket to be locked out so that it cannot be unplugged.
• Fixed with self-tapping screws or 3M double-sided tape.

• Made of high-strength transparent polycarbonate (PC).
• Easy to install: simply stick it onto the cabinet or electrical panel.
• Suitable for safety protection during equipment maintenance in the chemical industry, power plants, steelworks, workshops, etc.
• Suitable for industrial electrical switches or changeover switches with an outside dimension of less than 70 mm.

• Made of high-strength transparent polycarbonate (PC).
• Suitable for locking out American-style (toggle) wall switches.
• Easy to use; permanently prevents accidental operation.

• Made of high-strength transparent polycarbonate (PC).
• Suitable for standard rocker switches.
• Accepts padlocks with a shackle diameter of up to 7 mm.

• Made of polycarbonate; withstands temperatures from −20 °C to +120 °C.
• 22 mm lockout diameter, extendable to 30 mm by removing the detachable part.
• For locking out electrical push buttons such as emergency stop buttons.
• Allows simultaneous lockout by 2 people.

• Made of polycarbonate; withstands temperatures from −20 °C to +120 °C.
• Specifically designed to lock out Siemens emergency stop buttons or buttons with a protective collar in confined spaces.
• Suitable for the chemical, food, pharmaceutical and other industries.
• Allows simultaneous lockout by 2 people.

• Made of tough industrial ABS; withstands temperatures from −20 °C to +90 °C.
• Consists of an orange base (with 3M adhesive), two tensioners and a red strap.
• Very simple installation: stick the body to the panel, adjust the strap to the appropriate position and secure with a padlock and tag.
• Widely used in the electrical, oil and healthcare sectors.

• PA grip and chrome-plated steel shackle with red plastic- or vinyl-coated body; rust-resistant.
• Allows several padlocks to be fitted when isolating a single energy source.
• Padlock holes: 9.5 mm diameter.
• Jaw: 1“ (25 mm) and 1.5” (38 mm).

• PA grip and chrome-plated steel shackle with red plastic- or vinyl-coated body; rust-resistant.
• Fitted with tamper-resistant interlocking tabs that prevent unauthorised opening.
• Padlock holes: 9.6 mm diameter.
• Jaw: 1“ (25 mm) and 1.5” (38 mm).

• Made of heavy-duty steel with red plastic- or vinyl-coated body; rust-resistant.
• Allows several workers to lock out the same energy point by attaching their devices to the equipment.
• Padlock holes: 12 mm diameter.
• Jaw: 1“ (25 mm) and 1.5” (38 mm).

• Made of hardened steel with powder-coated finish; tough and rust-proof.
• Double locking system: the jaw hooks prevent the jaws from separating.
• Padlock holes: 12 mm diameter.
• Jaw: 1“ (25 mm) and 1.5” (38 mm).

• Made of steel with red paint finish.
• Allows several padlocks to be fitted when isolating a single energy source.
• Padlock holes: 11 mm diameter.
• Overall length: 136 mm, with 20.5 mm and 46 mm jaws.

• Made of heavy-duty nylon.
• Non-conductive body, suitable for electrical isolation in corrosive environments or where explosion protection is required.
• Allows several padlocks to be fitted when isolating a single energy source.
• Customisable labels.

• Made of nylon.
• Non-conductive body, suitable for locking out electrical isolations in corrosive environments or where explosion protection is required.
• Available with 3 mm or 6 mm diameter shackle.

• Surface-treated, non-sparking aluminium shackle with red nylon-coated body.
• Allows several padlocks to be fitted when isolating a single energy source.
• Padlock holes: 9 mm diameter.
• Jaw: 1“ (25 mm) and 1.5” (38 mm).

• Made of surface-treated, non-sparking aluminium.
• Allows several padlocks to be fitted when isolating a single energy source.
• Customisable colour. Laser-marked logo available.
• Overall length: 151 mm, with 25 mm and 38 mm jaws.

• Zinc alloy main body; PA-coated grip.
• Allows several padlocks to be fitted when isolating a single energy source.
• Padlock holes: 9 mm diameter.

• Made of anodised aluminium alloy.
• Tamper-resistant locking tabs; allows several padlocks to be fitted when isolating a single energy source.
• High-visibility, reusable, writable safety label: accepts pencil, ballpoint pen or marker for repeated use.
• Customisable label and colour.

• Made of high-strength hardened steel with anti-rust coating.
• Allows several padlocks to be fitted when isolating a single energy source.
• Keeps equipment out of service during repairs or adjustments.

• Anodised aluminium finish with high corrosion resistance.
• Keeps equipment out of service while repairs or adjustments are carried out.
• The control cannot be operated until the last worker's padlock is removed from the hasp.
• Offset lockout holes: the hasp cannot be locked in the open position.
• Raised areas for improved sliding.

• Steel hasp with red plastic grip.
• The 4 mm steel shackle fits smaller lockout points.
• Holds up to 2 safety padlocks.

• Made of hardened steel sheet; body surface finished with high-temperature paint.
• Several locking methods.
• Facilitates group lockout by several people.
• Suitable for the chemical industry, machinery manufacturing, the electrical and energy sector, etc.

• Spring-loaded bayonet lock, more convenient to use.
• Anodised aluminium main body with stainless steel interior, for higher corrosion resistance.
• Allows group lockout by several authorised persons.
• Hand-writable safety label.

• Made of PVC.
• Accepts any information: company name, photograph, name, contact telephone number or other required details.
• This lockout identification tag shows directly who is responsible and their details.

• Made of ABS.
• Provides systematic, procedural and compliant control of scaffolding on site.
• Printed with the wording “Do Not Use Equipment” on the front.

• Made of sheet steel with high-temperature plastic coating.
• 32 padlock positions; 2 padlocks or hasps can be hung in each position.
• Other sizes and specifications on request.

• Made of sheet steel with high-temperature plastic coating.
• LO-7013: 30 padlock hooks, with capacity for 60 padlocks.
• LO-7014: 20 padlock hooks and 4 tag holders.
• Suitable for centralised lockout management.
• Can be manufactured with a solid panel (no window) on request.

• Combined storage and group lock box: it has a lockable storage compartment and a group lockout compartment.
• Made of high-strength steel with powder coating for greater corrosion protection; the group lockout compartment has a transparent PC window with a slot for inserting keys.
• A padlock is fitted at each energy control point and the keys are placed in the box; each worker then fits their own padlock to the box to prevent access.
• Each employee retains exclusive control by fitting their own padlock to the box containing the keys to the working padlocks.
• As long as a single worker's padlock remains on the box, the keys to the working padlocks stored inside cannot be accessed.

• AISI 430 stainless steel construction for maximum corrosion resistance.
• Impact-resistant transparent window for viewing the keys held inside.
• Side window for viewing unused padlocks.
• 18 numbered lockout holes for easy identification.
• Latch with padlock hole on the front for locking out operations.
• Side-tab design for easy fitting of padlocks.
• Gasketed slot for depositing keys in a removable container.
• Drain holes in the base to limit the build-up of liquids inside.
• Stackable design for easy storage and transport of several boxes.
• Spare removable key containers available.

• Made of sheet steel with high-temperature plastic coating; stainless steel and nylon handle.
• Designed to hold keys during the shutdown of large equipment.
• Can be used as a portable mini lock box: holds several tags, hasps, mini lockout devices, etc.
• Dual function: wall-mounted or portable use.
• The integrated storage space holds 12 padlocks in order or hundreds of loose keys.
• Up to 14 workers can lock it out at the same time.
• Other colours on request.

• Made of ABS and PC engineering plastic.
• Transparent panel design for viewing the contents.
• Can be locked out with 8 safety padlocks at the same time; suitable for lockout management.
• Fitted with 6 internal and 2 external hooks.

• Made of ABS and PC engineering plastic.
• Transparent panel for viewing the contents.
• Can be locked out with safety padlocks with a shackle diameter of ≤ 8 mm.
• Allows management by up to 14 people at the same time.
• One-piece design with 2 hooks, sturdy and durable.
• The panel has a slot for inserting the key, making it easy to return it to the box.

• Made of sheet steel with high-temperature plastic coating.
• LO-7021: 10 padlock hooks and 2 tag holders.
• Suitable for centralised lockout management.
• Can be manufactured with a solid panel (no window) on request.

• Made of powder-coated steel, with key slot on the top.
• Includes a transparent polycarbonate window that slides out and is removed when the padlocks are taken off.
• Includes key hangers and identification labels that simplify key management, as well as pre-drilled holes and fittings for quick mounting.

• Made of PC engineering plastic.
• One-piece design, with lockable cover.
• Holds padlocks, hasps, lockout tags and some cable ties.
• Fitted with a padlock hole for locking the station and restricting access by unauthorised personnel.

• Made of ABS and PC engineering plastic.
• 8 hooks for hanging safety padlocks or hasps.
• Holds numerous padlocks, hasps, tags, mini lockout devices, etc.
• Lockable translucent cover that protects the contents from dust and prevents loss of material.

• Made of ABS, sturdy and durable.
• Accessories can be freely combined as required.
• Customisable logo.
• Overall dimensions: 380 mm (W) × 380 mm (H) × 10 mm (D).

• Made of glossy, durable acrylic, with padlock rails also in acrylic.
• Customisable warning label.
• Holds padlocks, tags and hasps.

• Made of sheet steel with high-temperature plastic coating.
• Impact-resistant transparent window for viewing and protecting work permits.
• Rubber gasket that protects documents from water outdoors or during cleaning.
• Includes a carrying handle for use without wall mounting.

• Made of sheet steel with high-temperature plastic coating.
• Impact-resistant transparent window for viewing the keys held during lockout.
• 12 numbered holes for personal safety padlocks.
• Includes a removable padlock tray for carrying equipment padlocks to the isolation points during lockout.
• Removable key bin: collects the held keys and keeps them visible during lockout, and allows them to be retrieved easily when the lockout is lifted.

• The LO-7059 permit control station combines the LO-7057 work permit display case and the LO-7058 wall-mounted group lock box.
• Installed at various points in a plant, the LO-7059 series improves the effectiveness and efficiency of group lockout, while communicating the details and status of work permits.

• Made of coated iron sheet and PP engineering plastic.
• Customisable warning text.

• ABS engineering plastic station with transparent PC cover.
• Pre-drilled holes for fixed wall mounting and attachable handle for carrying.
• Lockable transparent door: shows the contents at a glance and protects them from damage, theft and loss.
• External dimensions: 440 mm (W) × 390 mm (H) × 130 mm (D).

• Made of high-strength steel with powder-coated finish, for a long service life in industrial facilities.
• Warning label in English; other languages on request.

• Made of moulded reinforced nylon (engineering plastic).
• Carries up to 12 padlocks at a time.
• Warning label in English; other languages on request.

• Made of heavy-duty industrial oxford fabric.
• Lightweight and flexible; worn on the belt and holds up to 12 padlocks.
• With plastic spring for holding keys.
• Overall diameter 183 mm; Ø 10 mm padlock holes.

• Made of high-strength waterproof nylon fabric.
• Customisable bag wording.
• With hand grips and shoulder strap for easy carrying.

• Made of water-resistant polyester fabric.
• Lightweight and easy to carry or wear thanks to the adjustable belt.
• Customisable bag wording.

• Made of surface-treated aluminium.
• Holds all types of keys, cards, etc.
• Other capacities on request.

• Made of PE, durable.
• Includes a writable white paper card inside.
• Dimensions: 58 × 21 mm.
• Available in all colours.

• Made of aluminium.
• Outer diameter: 38 mm.

• For writing on PVC tags.
• Writing can be wiped off with a cloth or paper.

• Made of tough, highly durable PVC.
• Suitable for holding work permits and isolation documents.

• 1 × Lockout station (LO-7026)
• 4 × Safety padlock (LO-1001-RED)
• 1 × Lockout hasp (LO-2001)
• 1 × Lockout hasp (LO-2002)
• 12 × Lockout tag (LO-8003)
• Cable ties

• 1 × Lockout station (LO-7027)
• 10 × Safety padlock (LO-1001-RED)
• 1 × Lockout hasp (LO-2001)
• 1 × Lockout hasp (LO-2002)
• 24 × Lockout tag (LO-8003)
• Cable ties

• 1 × Lockout bag (LO-7077)
• 1 × Lockout hasp (LO-2001)
• 2 × Lockout tag (LO-8003)
• 2 × Safety padlock (LO-1001-RED)
• 2 × Circuit breaker lockout (LO-5026)
• 1 × Circuit breaker lockout (LO-5005)

• 1 × Portable padlock holder (LO-7073)
• 12 × Safety padlock (LO-1001-RED)

• 1 × Lockout tool box (LO-7061)
• 2 × Lockout hasp (LO-2001)
• 2 × Lockout hasp (LO-2002)
• 4 × Safety padlock (LO-1001-RED)
• 2 × Nylon lockout hasp (LO-2010)
• 1 × Cable lockout (LO-4002)
• 1 × Gate valve lockout (LO-3028)
• 1 × Ball valve lockout (LO-3001)
• 2 × Circuit breaker lockout (LO-5026)
• 1 × Circuit breaker lockout (LO-5029)
• 2 × Circuit breaker lockout (LO-5005)
• 12 × Lockout tag (LO-8003)

• 1 × Lockout bag (LO-7076)
• 2 × Safety padlock (LO-1001)
• 1 × Laminated padlock (LO-1064)
• 1 × Laminated padlock (LO-1066)
• 1 × Lockout hasp (LO-2001)
• 1 × Lockout hasp (LO-2002)
• 1 × Gate valve lockout (LO-3022)
• 1 × Gate valve lockout (LO-3024)
• 1 × Gate valve lockout (LO-3025)
• 1 × Gate valve lockout (LO-3028)
• 1 × Ball valve lockout (LO-3001)
• 1 × Pneumatic lockout (LO-6005)
• 1 × Cable lockout (LO-4002)

• 1 × Lockout station (LO-7048)
• 10 × Safety padlock (LO-1001-RED)
• 2 × Lockout hasp (LO-2001)
• 2 × Lockout hasp (LO-2002)
• 12 × Lockout tag (LO-8003)

• 1 × Lockout station (LO-7049)
• 20 × Safety padlock (LO-1001-RED)
• 2 × Lockout hasp (LO-2001)
• 2 × Lockout hasp (LO-2002)
• 24 × Lockout tag (LO-8003)

• 1 × Lockout bag (LO-7076)
• 1 × Lockout hasp (LO-2001)
• 1 × Lockout hasp (LO-2002)
• 1 × Laminated padlock (LO-1064)
• 1 × Laminated padlock (LO-1066)
• 2 × Safety padlock (LO-1001-RED)
• 1 × Plug lockout (LO-6006)
• 1 × Plug lockout (LO-6008)
• 1 × Circuit breaker lockout (LO-5026)
• 1 × Circuit breaker lockout (LO-5029)
• 1 × Circuit breaker lockout LO-5001, LO-5002 and LO-5003 (1 of each)
• 1 × Circuit breaker lockout LO-5010 and LO-5013 (1 of each)
• 1 × Circuit breaker lockout LO-6049 and LO-6048 (1 of each)
• 1 × Pneumatic lockout (LO-6002)

• 1 × Lockout station (LO-7050)
• 36 × Safety padlock (LO-1001-RED)
• 2 × Lockout hasp (LO-2001)
• 2 × Lockout hasp (LO-2002)
• 48 × Lockout tag (LO-8003)

• 1 × Lockout station (LO-7031)
• 30 × Safety padlock (LO-1004-RED)

• 1 × Lockout station (LO-7034)
• 108 × Lockout tag (LO-8003)

• 1 × Lockout station (LO-7032)
• 20 × Safety padlock (LO-1004-RED)
• 2 × Lockout hasp (LO-2001)
• 2 × Lockout hasp (LO-2002)
• 24 × Lockout tag (LO-8003)

• 1 × Lockout station (LO-7033)
• 20 × Safety padlock (LO-1004-RED)
• 1 × Gate valve lockout (LO-3022)
• 1 × Gate valve lockout (LO-3024)
• 1 × Plug lockout (LO-6006)
• 1 × Plug lockout (LO-6007)

• 1 × Lockout station (LO-7035)
• 72 × Lockout tag (LO-8003)
• 1 × Gate valve lockout (LO-3022)
• 1 × Gate valve lockout (LO-3024)
• 1 × Plug lockout (LO-6006)
• 1 × Plug lockout (LO-6007)

• 1 × Lockout bag (LO-7078)
• 10 × Lockout tag (LO-8002)
• 1 × Safety padlock (LO-1001-RED)
• 1 × Aluminium padlock (LO-1069)
• 1 × Circuit breaker lockout (LO-5026)
• 1 × Circuit breaker lockout (LO-5029)
• 1 × Circuit breaker lockout (LO-5030)
• 1 × Lockout hasp (LO-2001)

• 1 × Lockout bag (LO-7079)
• 1 × Safety padlock (LO-1001-RED)
• 1 × Safety padlock (LO-1070-RED)
• 12 × Lockout tag (LO-8003)
• 2 × Circuit breaker lockout (LO-5055)
• 1 × Circuit breaker lockout (LO-5054)
• 1 × Lockout hasp (LO-2001)

• 1 × Lockout bag (LO-7080)
• 2 × Safety padlock (LO-1001)
• 2 × Lockout tag (LO-8003)
• 2 × Lockout hasp (LO-2001)
• 2 × Tape

• 1 × Lockout bag (LO-7081)
• 1 × Safety padlock (LO-1001)
• 1 × Safety padlock (LO-1070)
• 2 × Circuit breaker lockout (LO-5055-S)
• 1 × Circuit breaker lockout (LO-5054-S)
• 1 × Lockout hasp (LO-2001)
• 12 × Lockout tag (LO-8003)
• Tape