Ref. 790
White matt paper, 149 µm, designed for industrial high speed inkjet printing. Works with dye and pigment inks. The synthetic rubber hotmelt adhesive has high tack and adheres well on both polar and non-polar surfaces. The key operating detail: with 50 g/m² of adhesive, cutting and rewinding require low speeds and controlled tension — it is not suitable for automatic dispensing.
High speed inkjet · Dye + pigment · High tack · Polar and non-polar · No automatic dispensing
When is this material right for you?
The labelling process uses industrial high speed inkjet printing and you need a matt paper with good printability for both dye and pigment inks
The bonding surface may be polar (glass, metal) or non-polar (PE, PP, untreated HDPE) and you need a single adhesive that works on both without changing material
The application is multi-sector —luggage, medical, packaging or food— and labelling is manual or semi-automatic, not with standard automatic dispensing machines
You need a wide temperature range: from cold chain through to moderate-heat environments, with the adhesive not failing between -20 and +70 °C
The high adhesive coat weight (50 g/m²) requires low cutting and rewinding speeds and controlled tension — always run a test under your real conditions before starting production.
Why adhesive coat weight dictates processing
High speed inkjet + an adhesive that rules out automatic dispensing
Ref. 790 ARGIPRINT RHODA is a white matt paper prepared for industrial high speed inkjet printing. It works with dye and pigment inks, and the synthetic rubber hotmelt adhesive has a lot of tack. Like Ref. 797, it adheres on both polar and non-polar surfaces — but here the difference lies in the base material (paper, not PP) and, above all, in the adhesive coat weight: 50 g/m².
That high coat weight is what defines its behaviour on the production line. On cutting and rewinding machines you need to go slowly and with low tension; if the speed is forced, the adhesive can bleed. This material is not suitable for standard automatic dispensing. If your line uses automatic dispensing, check with us before specifying.
The service range runs from -20 to +70 °C, valid for cold chain, aircraft hold luggage and packaging with moderate heat. Before starting production, it is advisable to run tests under the real printing, processing and bonding conditions. Shelf life is 12 months in original packaging, stored in a cool place at 50-60% relative humidity.
Before specifying
Automatic dispensing
Not recommended
50 g/m² hotmelt adhesive — low cutting and rewinding speeds, controlled tension. Consult us if your line uses automatic dispensing.
Rubber hotmelt adhesive
50 ±3 g/m² · High tack
Permanent · Adhesion on polar and non-polar surfaces · No wait time to set.
Service range
-20 / +70 °C
Industrial cold through to moderate heat · Multi-sector with no material change.
Physical properties of the material
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| Matt Paper HS Inkjet | 149 | µm | White matt · Dye and pigment printability |
| Rubber hotmelt adhesive · coat weight | 50 ±3 | g/m² | Synthetic rubber · High tack · Polar and non-polar · No automatic dispensing |
| Total thickness | 245 ±15 | µm | Paper 149 µm + Adhesive + Release liner · Total weight 223 ±8 g/m² |
| Application temp. | -5 / +45 | °C | Application also valid under moderate sub-zero conditions |
| Service range | -20 / +70 | °C | Industrial cold, room temperature and moderate heat |
| Total weight | 223 ±8 | g/m² | Full construction: paper + adhesive + release liner |
| White glassine release liner | 62 ±3 | g/m² | Silicone-coated on both sides · ~55 µm |
| Shelf life | 12 | months | Original packaging · Cool location · 50-60% relative humidity |
Synthetic rubber hotmelt adhesive — key performance
Behaviour under conditions of use
High speed inkjet printing
Matt paper prepared for industrial HS inkjet systems · Dye and pigment inks · Always test with your equipment before starting production
Polar and non-polar surfaces
Synthetic rubber hotmelt · Adheres to glass, metal, PE, PP and untreated HDPE · High tack with no need for primer or corona treatment
Wide temperature range
-20 / +70 °C in service · Valid for cold chain, hold luggage and packaging with moderate heat
Automatic dispensing
50 g/m² adhesive · Risk of adhesive bleed if speed is forced · Not suitable for standard automatic dispensing machines
Multilayer composition
How it is built
Do you need to validate this material for your application?
Tell us which printing system you use, the bonding surface and how you process labels on your line. We will confirm whether Ref. 790 is suitable for your project within 24 hours.
If your line uses automatic dispensing, let us know — we'll advise you on the most suitable alternatives.
Technical documentation
For more technical details, we have the complete version of the Technical Data Sheet in PDF format.
Download PDF specificationSupply details
Free technical sample
We send it to you before production to validate in your real process.
Response in less than 24 hours
Technical consultation handled by specialists since 1994.
Custom format
Roll, sheet or die-cut according to reference and process.
Delivery throughout Europe
We supply to the entire European Union.
Do you need to validate this material?
Tell us your printing system, the bonding surface and how you process labels on your line. We will respond within 24 hours.
- Free technical advice with no obligation.
- Response in less than 24 hours.
- Material samples when the project requires it.