White Matt Cast PP · Ref. 875
A white matt cast PP, 125 µm, with a coating for Water Inkjet and thermal transfer printing, and a high-cohesion UV1P hotmelt adhesive. Solar radiation resistance proven for more than 2 years outdoors. Suitable for indirect food contact. Applies from 0 °C, service between -20 and +50 °C.
Water Inkjet · Thermal transfer · High-cohesion UV1P hotmelt · Solar resistance · Food contact · Matt PP · Quick stick >15 N/inch
When is this the right material?
Water Inkjet or thermal transfer — the matt PP coating accepts both printing systems
Prolonged solar exposure — UV1P does not degrade or lose adhesion under UV radiation
Indirect food contact — variable-data printing and food compliance in the same material
Matt finish — good readability under direct sunlight or in environments with glare
Always run a test with your equipment and inks before starting production.
Why UV1P makes the difference
Inkjet or TT + solar resistance + indirect food contact
The differential angle of Ref. 875 is not just the Water Inkjet coating — other PP films accept inkjet too — but the combination with a UV1P hotmelt adhesive whose main characteristic is resistance to degradation from solar radiation. A standard hotmelt loses cohesion under prolonged UV exposure: it softens, flows, and the label ends up coming away. UV1P keeps adhesion stable outdoors for more than 2 years.
The adhesive also has approval for indirect food contact. That makes it useful for outdoor agri-food applications, fruit and vegetables, food packaging stored or displayed outdoors, or any product that combines both requirements: digital inkjet and food compliance.
The face material is a white matt cast PP with a coating for Water Inkjet, compatible with dye and pigment inks, and it can also be printed by thermal transfer with ribbon. Before starting production, we always recommend a test with the specific equipment and inks or ribbon you will use, since performance can vary between systems.
The same UV1P adhesive is available on 50 µm white gloss polyester: the Ref. 862. The high-adhesion labels page compares the two references and explains when another adhesive is needed.
Before specifying
Printing
Water Inkjet · Thermal transfer
Dye and pigment inks, or ribbon: ask us which is the most suitable. Always validate with your specific equipment before starting production.
UV1P adhesive
Hotmelt · 20 g/m² · High cohesion
Quick stick >15 N/inch · Shear >15 h · Resistant to solar UV radiation.
Maximum service temperature
+50 °C
Not recommended for processes with intense heat or autoclaves.
Ref. 875 · White Matt Cast PP / UV1P · Lit-Off Desarrollo
Physical properties of the material
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| White Matt Cast PP Film | 125 | µm | Matt finish · Water Inkjet and TT coating · Dye and pigment inks or ribbon |
| UV1P adhesive · coat weight | 20 | g/m² | Permanent hotmelt · High cohesion · Resistance to solar UV radiation |
| UV1P quick stick | >15 | N/inch | High initial tack · Adhesion from first contact |
| UV1P shear | >15 | hours | Resistance to hot flow · High internal cohesion of the adhesive |
| Application temperature | 0 / +40 | °C | Labelling in moderate cold or room temperature |
| Service range | -20 / +50 | °C | Outdoor, refrigerated and room temperature · Not suitable for high temperature |
| Super-calendered paper liner | 53 | µm | Consistent release · Suitable for automatic labelling |
UV1P adhesive — key performance
Performance against conditions of use
Water Inkjet and TT printing
Dye and pigment inks or thermal transfer with ribbon · Good definition · Always test with your equipment before starting production
Solar exposure / outdoors
UV1P adhesive resists solar radiation · +2 years proven outdoors with no lifting or loss of cohesion
Indirect food contact
UV1P adhesive approved for indirect food contact · Request the Declaration of Conformity from our team
High temperature
Max. +50 °C in service · Not suitable for processes with intense heat, autoclaves or shrink-wrap tunnels
Multilayer composition
How it is built
Do you need to validate this material for your application?
Tell us which equipment you print with (Water Inkjet or thermal transfer), where the label will go, and whether you need the food Declaration of Conformity. We will confirm whether Ref. 875 is suitable within 24 hours.
If you need the Declaration of Conformity for food contact, request it directly from our team when requesting your sample.
Technical documentation
For more technical details, we have the complete version of the Technical Data Sheet in PDF format.
Download PDF specificationSupply details
Free technical sample
We send it to you before production to validate in your real process.
Response in less than 24 hours
Technical consultation handled by specialists since 1994.
Custom format
Roll, sheet or die-cut according to reference and process.
Delivery throughout Europe
We supply to the entire European Union.
Frequently asked questions
What are the application and service ranges?
It is applied between 0 °C and +40 °C and works in service from −20 °C to +50 °C.
What adhesive does it carry?
The UV1P, at 20 g/m², with quick stick above 15 N per inch and shear of more than 15 hours.
What is the material like?
A 125 µm matt white cast polypropylene film on a 53 µm supercalendered paper liner.
Do you need to validate this material?
Tell us your printing equipment (Water Inkjet or thermal transfer), the application surface and the conditions of use. If you need the food Declaration of Conformity, request it when you order the sample.
- Free technical advice with no obligation.
- Response in less than 24 hours.
- Material samples when the project requires it.
