Technical Data Sheets
Tapes with silicone adhesive to protect the areas of the part that are not coated: threads, holes and contact surfaces. The green polyester ones, Ref. 2560 and Ref. 3565, are designed for powder coating, cataphoresis, anodizing and circuit boards, withstand up to 200 and 210 °C and remove without leaving adhesive residue. The polyimide one, Ref. 4201, works at 180 °C continuously and withstands up to 280 °C, with electrical insulation.
View all familiesGreen polyester · Silicone · 0.060 mm
Masking tape with a 25 µm polyester film for powder coating, cataphoresis, anodizing and circuit boards. Very good initial tack and removal without adhesive residue.
Green polyester · Silicone · 0.065 mm
The thicker-film version: 36 µm, more steel adhesion (≥ 600 g/25 mm) and more dielectric strength (≥ 6 kV). For the same masking processes, up to 210 °C.
Amber polyimide · Silicone · 0.065 mm
Polyimide film for thermal and chemical protection in electronics and electrical insulation in transformers, motors, generators and lithium batteries. 180 °C continuous.
Which areas are covered, with which method, and how to apply and remove the tape: how to mask parts for powder coating.
If the part also has to carry a label during painting, see Ref. 81020 and the guide to labels for powder coating and cataphoresis. For other widths or processes, contact us.
Contact
Tell us the material, the operating environment and what information you need. We will send you the documentation or guide you to the right choice.