Circuit breaker lockouts
Lockout devices for miniature circuit breakers (MCB), moulded case circuit breakers (MCCB) and other automatic switches. They prevent the toggle from being operated during maintenance work; they fit without tools or with a small screwdriver and accept a safety padlock. “Pin-out”, “pin-in”, “tie-bar”, clamp-type and clamp-on models, plus combined sets.
38 products · 48 references
Catalogue
Products in circuit breaker lockouts
Circuit breaker lockouts
Miniature circuit breaker (MCB) lockout
Standard “pin-out”
Made of reinforced PA nylon (engineering plastic).
1 ref. LO-5001
See data sheet →
Circuit breaker lockouts
Miniature circuit breaker (MCB) lockout
Standard “pin-in”
Made of reinforced PA nylon (engineering plastic).
1 ref. LO-5002
See data sheet →
Circuit breaker lockouts
Miniature circuit breaker (MCB) lockout
Standard “pin-out”, wide hole spacing
Made of reinforced PA nylon (engineering plastic).
2 ref. LO-5003, LO-5004
See data sheet →
Circuit breaker lockouts
Miniature circuit breaker (MCB) lockout
“Tie-bar” lockout
Made of reinforced PA nylon (engineering plastic).
1 ref. LO-5005
See data sheet →
Circuit breaker lockouts
Miniature circuit breaker lockout, “pin-in” toggle
Made of tough ABS; withstands temperatures from −20 °C to +90 °C.
1 ref. LO-5006
See data sheet →
Circuit breaker lockouts
Miniature circuit breaker lockout, “pin-out” toggle
Made of ABS and polycarbonate (PC).
1 ref. LO-5007
See data sheet →
Circuit breaker lockouts
Miniature circuit breaker lockout, wide “pin-out” toggle
Made of ABS and polycarbonate (PC).
1 ref. LO-5008
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
LO-5049
Made of reinforced PA nylon (engineering plastic).
2 ref. LO-5009, LO-5010
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
LO-5011
Made of reinforced PA nylon; withstands temperatures from −20 °C to +120 °C.
1 ref. LO-5011
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
LO-5050
Made of reinforced PA nylon (engineering plastic).
3 ref. LO-5012, LO-5013, LO-5014
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
LO-5051
Made of reinforced PA nylon (engineering plastic).
2 ref. LO-5015, LO-5016
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
LO-5052
Made of reinforced PA nylon (engineering plastic).
2 ref. LO-5017, LO-5018
See data sheet →
Circuit breaker lockouts
Large moulded case circuit breaker (MCCB) lockout
LO-5053
Made of reinforced PA nylon (engineering plastic).
2 ref. LO-5019, LO-5020
See data sheet →
Circuit breaker lockouts
Combined circuit breaker lockout set
Made of reinforced PA nylon (engineering plastic).
2 ref. LO-5021, LO-5022
See data sheet →
Circuit breaker lockouts
Multifunction circuit breaker lockout
Made of reinforced PA nylon (engineering plastic).
1 ref. LO-5023
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
LO-5024
Made of tough ABS.
1 ref. LO-5024
See data sheet →
Circuit breaker lockouts
Multifunction circuit breaker lockout
LO-5025
Made of reinforced PA nylon (engineering plastic), with brass screw.
1 ref. LO-5025
See data sheet →
Circuit breaker lockouts
Clamp-on circuit breaker lockout
LO-5026
Made of tough polypropylene and impact-modified nylon.
1 ref. LO-5026
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
LO-5027 / LO-5028 (Schneider EZD)
Made of tough polypropylene and impact-modified nylon; withstands temperatures from −5 °C to +100 °C.
2 ref. LO-5027, LO-5028
See data sheet →
Circuit breaker lockouts
Clamp-on circuit breaker lockout
LO-5029
Made of tough polypropylene and impact-modified nylon.
1 ref. LO-5029
See data sheet →
Circuit breaker lockouts
Clamp-on circuit breaker lockout
LO-5030
Made of tough polypropylene and impact-modified nylon.
1 ref. LO-5030
See data sheet →
Circuit breaker lockouts
Clamp-on circuit breaker lockout
Made of PC engineering plastic.
1 ref. LO-5031
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Made of reinforced PA nylon; withstands temperatures from −20 °C to +120 °C.
1 ref. LO-5032
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Material: die-cast aluminium alloy, PA nylon and painted metal.
1 ref. LO-5033
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Material: die-cast aluminium alloy, PA nylon and painted metal.
1 ref. LO-5034
See data sheet →
Circuit breaker lockouts
Multifunction circuit breaker lockout
Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
1 ref. LO-5035
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
1 ref. LO-5036
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
1 ref. LO-5037
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
1 ref. LO-5038
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Made of aluminium alloy.
1 ref. LO-5039
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Made of PA nylon and zinc alloy; withstands temperatures from −20 °C to +120 °C.
2 ref. LO-5040, LO-5041
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Body made of standard A3 steel sheet, with high-temperature-resistant painted finish.
1 ref. LO-5042
See data sheet →
Circuit breaker lockouts
Miniature circuit breaker lockout
Made of engineering plastic.
1 ref. LO-5043
See data sheet →
Circuit breaker lockouts
Miniature circuit breaker lockout
Made of highly durable ABS.
1 ref. LO-5044
See data sheet →
Circuit breaker lockouts
Snap-on circuit breaker lockout
Made of reinforced PP engineering plastic.
1 ref. LO-5045
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout
Made of reinforced engineering PA nylon; withstands temperatures from −20 °C to +120 °C.
1 ref. LO-5046
See data sheet →
Circuit breaker lockouts
Large moulded case circuit breaker lockout
Made of reinforced PA nylon; withstands temperatures from −20 °C to +120 °C.
1 ref. LO-5047
See data sheet →
Circuit breaker lockouts
Circuit breaker lockout with locking bar
ABS engineering plastic base and PA nylon main bar.
1 ref. LO-5048
See data sheet →Reference index
All references (48)
| Ref. | Description | Product |
|---|---|---|
| LO-5001 | Standard “pin-out”; requires 2 holes; for circuit breakers up to 60 A | Miniature circuit breaker (MCB) lockout · Standard “pin-out” |
| LO-5002 | Standard “pin-in”; requires 2 holes; for circuit breakers up to 60 A | Miniature circuit breaker (MCB) lockout · Standard “pin-in” |
| LO-5003 | Standard “pin-out”; suitable for small circuit breakers with a hole spacing ≤ 17 mm | Miniature circuit breaker (MCB) lockout · Standard “pin-out”, wide hole spacing |
| LO-5004 | Standard “pin-out”; suitable for small circuit breakers with a hole spacing ≤ 20 mm | Miniature circuit breaker (MCB) lockout · Standard “pin-out”, wide hole spacing |
| LO-5005 | “Tie-bar” lockout; no hole required in the circuit breaker | Miniature circuit breaker (MCB) lockout · “Tie-bar” lockout |
| LO-5006 | Locks out most miniature circuit breakers | Miniature circuit breaker lockout, “pin-in” toggle |
| LO-5007 | Locks out most miniature circuit breakers | Miniature circuit breaker lockout, “pin-out” toggle |
| LO-5008 | Locks out most miniature circuit breakers | Miniature circuit breaker lockout, wide “pin-out” toggle |
| LO-5009 | 9 mm padlock hole; max. clamping 8 mm; requires a small screwdriver for installation | Circuit breaker lockout · LO-5049 |
| LO-5010 | 9 mm padlock hole; max. clamping 8 mm; tool-free installation | Circuit breaker lockout · LO-5049 |
| LO-5011 | Max. clamping 7.5 mm; requires a small screwdriver for installation | Circuit breaker lockout · LO-5011 |
| LO-5012 | 9 mm padlock hole; max. clamping 10.5 mm; requires a small screwdriver for installation | Circuit breaker lockout · LO-5050 |
| LO-5013 | 9 mm padlock hole; max. clamping 10.5 mm; tool-free installation | Circuit breaker lockout · LO-5050 |
| LO-5014 | 10 mm padlock hole; max. clamping 10.5 mm; tool-free installation | Circuit breaker lockout · LO-5050 |
| LO-5015 | 8 mm diameter hole; requires a small screwdriver for installation | Circuit breaker lockout · LO-5051 |
| LO-5016 | 8 mm diameter hole; tool-free installation | Circuit breaker lockout · LO-5051 |
| LO-5017 | 8.5 mm diameter hole; requires a small screwdriver for installation | Circuit breaker lockout · LO-5052 |
| LO-5018 | 8.5 mm diameter hole; tool-free installation | Circuit breaker lockout · LO-5052 |
| LO-5019 | Max. clamping 20.7 mm; requires a small screwdriver for installation | Large moulded case circuit breaker (MCCB) lockout · LO-5053 |
| LO-5020 | Max. clamping 20.7 mm; tool-free installation | Large moulded case circuit breaker (MCCB) lockout · LO-5053 |
| LO-5021 | LO-5009 ×1, LO-5012 ×1, LO-5015 ×1, LO-5017 ×1, LO-5019 ×1 | Combined circuit breaker lockout set |
| LO-5022 | LO-5010 ×1, LO-5013 ×1, LO-5016 ×1, LO-5018 ×1, LO-5020 ×1 | Combined circuit breaker lockout set |
| LO-5023 | Suitable for miniature circuit breakers with a toggle width ≤ 9 mm and medium circuit breakers with a toggle width ≤ 11 mm | Multifunction circuit breaker lockout |
| LO-5024 | Toggle width “a”: 7 mm ≤ a ≤ 15 mm | Circuit breaker lockout · LO-5024 |
| LO-5025 | Accepts 1 padlock with a shackle diameter ≤ 10.5 mm | Multifunction circuit breaker lockout · LO-5025 |
| LO-5026 | For locking out 120–277 V circuit breakers; toggle width ≤ 16.5 mm | Clamp-on circuit breaker lockout · LO-5026 |
| LO-5027 | Specific to Schneider EZD circuit breakers below 100 A | Circuit breaker lockout · LO-5027 / LO-5028 (Schneider EZD) |
| LO-5028 | Specific to Schneider EZD circuit breakers from 160 to 250 A | Circuit breaker lockout · LO-5027 / LO-5028 (Schneider EZD) |
| LO-5029 | For locking out 480–600 V circuit breakers; toggle width ≤ 41 mm | Clamp-on circuit breaker lockout · LO-5029 |
| LO-5030 | For locking out large 480–600 V circuit breakers; toggle width ≤ 70 mm | Clamp-on circuit breaker lockout · LO-5030 |
| LO-5031 | For locking out large 480-600 V circuit breakers; toggle width ≤ 70 mm | Clamp-on circuit breaker lockout |
| LO-5032 | Suitable for miniature circuit breakers (MCB) and small moulded case circuit breakers (MCCB), etc. | Circuit breaker lockout |
| LO-5033 | Maximum jaw opening 17.5 mm | Circuit breaker lockout |
| LO-5034 | Maximum jaw opening 11 mm | Circuit breaker lockout |
| LO-5035 | Suitable for locking out multi-pole circuit breakers; compatible with most tie-bar toggles | Multifunction circuit breaker lockout |
| LO-5036 | Suitable for moulded case circuit breakers (MCCB) up to 100 A | Circuit breaker lockout |
| LO-5037 | Suitable for moulded case circuit breakers (MCCB) from 100 A to 250 A | Circuit breaker lockout |
| LO-5038 | Suitable for moulded case circuit breakers (MCCB) above 250 A | Circuit breaker lockout |
| LO-5039 | Maximum jaw opening 6.7 mm | Circuit breaker lockout |
| LO-5040 | Suitable for push-button-operated motor protection circuit breakers; maximum jaw opening 47.5 mm | Circuit breaker lockout |
| LO-5041 | Suitable for rotary-selector-operated motor protection circuit breakers; maximum jaw opening 53.5 mm | Circuit breaker lockout |
| LO-5042 | Suitable for the Schneider NSX moulded case circuit breaker series from 100 A to 630 A | Circuit breaker lockout |
| LO-5043 | Suitable for small Chint, Delixi, ABB, Schneider and other circuit breakers | Miniature circuit breaker lockout |
| LO-5044 | Suitable for Schneider IC65 or IC65N series miniature circuit breakers, single-pole or multi-pole | Miniature circuit breaker lockout |
| LO-5045 | For 120 V circuit breakers with a hole in the toggle | Snap-on circuit breaker lockout |
| LO-5046 | Locks out most miniature circuit breakers (MCB) | Circuit breaker lockout |
| LO-5047 | Suitable for extra-large moulded case circuit breakers with a toggle width of 30 to 37 mm | Large moulded case circuit breaker lockout |
| LO-5048 | Bar length: 195 mm | Circuit breaker lockout with locking bar |
More LOTO solutions
Other categories
LOTO supply
Reply within 24 h
Quote with references, lead time and keying configuration.
Custom keying systems
Keyed different (KD), keyed alike (KA), master key (MK) and grand master key (GMK); key combinations kept on record for replacements.
Customisation
Laser marking of your logo, numbering of keys and padlock bodies, tags in your language.
Shipping throughout Europe
We supply the whole European Union from Sabadell (Barcelona).
Do you need a quote for this category?
Please state the circuit breaker lockouts references you need, quantities and keying system where applicable. We will send you a quote and lead time.
Reply within 24 hours.
- Advice on the keying system and the appropriate configuration.
- Quote by reference and quantity, with no obligation.
- Full catalogue available for download as PDF.